home Repairs Large home appliances The washing machine won't turn on - what should I do?

The washing machine won't turn on - what should I do?

A modern washing machine is a fairly reliable and practical assistant in the house. But there are situations when the washing machine does not turn on and refuses to perform its functions. This is a fairly common problem with washing machines. It would seem that the whole procedure is according to the standard scheme, but the washing machine refuses to start the washing process.

What can cause this malfunction?

The reasons why the washing machine does not turn on can be different. You can diagnose and repair simple breakdowns at home on your own. But sometimes the problems in the operation of the washing machine can be more serious, then you can not do without the help of a qualified specialist. The reason why the washing machine does not turn on or the washing process does not start may be a failure:

  • Power supply - sockets;
  • Power cord;
  • Start button;
  • Interference filter;
  • Loading door locking systems;
  • Command device or control module.

Checking the health of the socket

Often there are situations when the machine does not start the wash cycle because the socket is broken. The easiest way to test the power supply is with an indicator screwdriver. If such a measuring device is not at hand, you can connect other electrical equipment (for example, a light bulb or a mobile phone charger) to it. In the case when the power supply connector is working, but the washing machine still refuses to start the wash, the reason should be looked for in the device itself, for this a multimeter will be needed.

See also - Atlant washer generates F3 error - what does it mean?

The power cord is damaged in the plug or wire

To check for possible malfunctions, carefully inspect the power cord and plug for kinks or breaks. It consists of three wires, each of which is subjected to different loads, they are often the cause of breakdown. The serviceability of each wire should be checked using a tester. If the integrity is broken or the device does not give the corresponding readings, then the power cord must be completely replaced.

The power cord is damaged in the plug or wire

Checking the wash start button

Two wires go to the button that is responsible for starting the washing program. You need to ring them with a multimeter. Also, using the tester, the power button itself is checked in active and inactive modes.If a malfunction is detected during the diagnosis, the part must be completely replaced.

Interference filter (FPS): value and performance check

The control unit, electric motor and other parts create radio frequency waves while the washing machine is running, which can harm other household appliances in the vicinity of the machine. To protect electrical appliances, the machine has an interference filter. In the event of its malfunction, it will create an obstacle to the passage of electric current. This will be the reason why the machine does not start the washing process. To check the performance of this part, you need to diagnose the wires, at the input and output, as well as the device itself using a tester. If the FPS does not work, you need to order a new filter at the service center or make an application for its replacement.

The noise filter (FPS) is checked for serviceability

Hatch lock malfunctions

The loading door of the washing machine is not tightly closed, or the lock lock has broken. If the washing machine does not turn on for the washing program, but the indicators are on, then the first thing to check is whether the loading door is closed correctly and whether the lock system works after trying to start the program.

A fairly common reason why the lock of the washing machine does not work - skewed door or hook on it. The door level can be adjusted using the mounting bolts. If the problem is fixing the hook, you must check the presence of a metal rod that holds it. During operation, it could fall out and become the reason why the automatic machine door lock does not work.

Defective UBL or skewed washing machine door

If the tank door closes with a characteristic click, but after the wash program starts, the lock function is not activated, then most likely there is a problem with the door lock device (HLD). To confirm the malfunction, it is necessary to ring the lock with a tester. But first, you should visually inspect the castle using a flashlight. Maybe small debris has got into the hole, which prevents the locking system from working correctly.

See also - Which company is better to choose a washing machine

Malfunction of the controller or control module

If, after diagnostic measures, all indicators remain normal, but the machine still does not start the washing program, the cause may be a failure of the control module or the command device. Replacing the electronic module - quite expensive repairs and it is often easier to purchase a new washing machine. But there are times when it can be repaired. For this, the contractor must have experience and knowledge of electrical work. If there are none, then you can’t do without a qualified master.

Command or control module out of order

Prevention of breakdowns of the washing machine

In most cases, the life of the washing machine without repair can be increased by following simple rules:

  • Follow the instructions of the device manufacturer;
  • To protect against power surges and short circuits, the washing machine can only be connected through special protective devices (RCDs);
  • Use a machine with the expectation of rest. If several washings are planned for the day, you need to take a break between them for 2-3 hours;
  • Prevent the appearance of mold and the growth of other fungi in the installation site of the device and in the device itself. To do this, after the end of washing, the compartment intended for filling the powder, as well as the rubber gaskets of the hatch, must be wiped dry and the door of the loading tank left open for several hours;
  • Use only high quality detergents for washing. Modern powders and gels are made with the addition of special elements that prevent the formation of salts on the structural elements of the washing machine;
  • At least once every six months, start a preventive wash cycle on a program providing a high temperature regime with the addition of anti-scale agents.

Such preventive measures will not only prevent breakdowns that lead to the washing machine not turning on, but also save the consumer's financial resources spent on electricity.

See also:

24410 0

We advise you to read:

TOP 12 best washing machines according to customer reviews