At the moment, large-sized household appliances have become an integral part of the interior of any apartment. Automatic washing units can be made in any overall size and with any method of loading dirty laundry (vertical and horizontal), and therefore, they can be installed in almost any bathroom or kitchen. They will be able to complement any design decision. In order to install the unit in the countertop or under the sink, you must use siphon for a washing machine. Its installation to prevent the occurrence of unpleasant odors in the room, thanks to the presence of a hydraulic seal.
How to connect?
In the technical documentation that is attached to this type of equipment, the water pressure necessary for the normal functioning of the device must be prescribed. If you connect the machine on the top floor of an apartment building, you need to make sure that the difference in height of the tank of the washing machine allows you to achieve the desired minimum pressure.
This problem practically does not arise for the residents of the first and second floors, the water pressure at their level is acceptable for the operation of the washing machine. If you want to install 2 or more washing machines in your apartment, then it would be best to consult a specialist.
It is necessary to study in more detail the schematic description of the process of connecting the unit to the sewage system. The washing machine has been removed from this diagram:
- underwater half-inch pipe;
- machine valve;
- hoses occasion. plastic;
- pouring liquid;
- hose for water drainage;
- water intake pipe;
- sewer pipe for draining liquid.
See also - Installing a socket for a washing machine in the bathroom
Water supply and installation of self-tapping valves
In the delivery set of the washing machine, you will receive plastic hoses, which are designed to connect household appliances to a water supply and sewer system. They are located on the lower rear side of the unit. For fixing the hoses, small threaded circles are provided at its end.
In addition to hoses, manufacturers will put a valve with which you can connect to the pipe. If necessary, you can easily block the water flow path into the machine. It is quite easy to operate, because after it is closed, water will continue to flow to the rest of the room, so you can use it both in the bath and in the kitchen.
In the event that a valve was not included in the kit, you need to personally purchase it at the nearest hardware store.It is necessary to focus on Italian or German models, as they will serve you for years and even decades. You should not save and buy cheap Chinese counterparts, because not only will they eat money from your family budget, they can also cause a flood in your apartment.
Such a thing as a flood will undoubtedly affect your mood and wallet, because in addition to your apartment, the neighbor's one may also suffer.
In special cases, you can use a dedicated self-tapping valve. He will easily make a hole in a water-carrying pipe and will not require overlapping water in it. Such valves are usually marked with a special color, and they also have a special thread for connecting the machine's inlet hose.
The use of these valves is permissible only in cases where no additional water intake devices are installed on the pipe. After all, the valve can significantly reduce the pressure, and the washing machine requires a lot.
Step-by-step valve installation
Consider in detail the installation of a self-tapping valve under the washing machine:
- the first step is to attach the plate to the wall surface in order to install the clamp;
- after which it is necessary to place an overhead piece with a rubberized gasket, after carrying out these manipulations, check the correct fixation and if everything is in order, you can screw it;
- turn the valve so that it is in the closed position so that water does not enter and screw it into the cover plate. The self-tapping valve is designed in such a way that there is a cutting edge in its penetrating part, thanks to which you can make a hole without much effort;
- After completing all the above steps, it is necessary to tighten the control nut tightly with a gas wrench. It is necessary to install a washing machine inlet hose on the branch.
After connecting the hose to the washing machine, do not forget to move the valve to the "open" operating position, which will ensure unhindered water supply.
Connection option using a tee
Installation in the absence of water pipes near the connection area is possible by installing a "tee"
You need to position the tee so that the hose can easily connect to it, and washing did not bother him. We advise you to buy tees with a hydro-lock, which can shut off the water if something happens. It is categorically not recommended to make such a tie-in at the beginning and end of the pipe; it is best to insert the tee in another section.
Note! To carry out this manipulation, it is necessary to completely dehydrate the riser. In some cases, to carry out this step, you must contact your housing office. If you are not confident in the forces, the best solution is to call a specialist who will do everything quickly and efficiently. You can find it on the Internet or contact the same housing office.
After completing all the procedures, be sure to screw the drain hose to the washing machine.
Siphon with water drain
Washer trap for washing machine can easily drain all the water from it. It is installed directly on the pipe. The siphon built into the pipe is used not only to get rid of the used water, but also to prevent an unpleasant smell from entering the apartment through it. Do not forget to look at the number in the technical documentation of household appliances indicating the maximum height of the drain installation. If you failed to find this information, then it is equal to the standard value and should not exceed 60 cm from the floor level.
If the washing machine is installed near the sink, you can use sink siphon. In addition to everything, a hose for draining water into the sink, bathroom or toilet is included in the delivery package, you just need to fix the hook to the corner.
Output
In this article, we examined options for how to connect siphon for washing machine, and discussed all the main subtleties and points of correct installation and operation of the device.
See also:
- 7 best LG washing machines
- 7 best Gorenje washing machines according to customer reviews
- 7 best washing machines before according to customer reviews
- 8 best narrow washing machines according to buyers
- 8 best BEKO washing machines according to customer reviews
