ICLEBO Pop Robot Vacuum Cleaner Review

Content:

Specifications
Equipment
Design
Functional
Advantages and disadvantages

The bright and beautiful iClebo Pop model is a simplified version of the model of the Korean manufacturer iClebo Arte. It lacks a camera, a system of smart advanced navigation, a second side brush, this has reduced the cost of the model. At the same time, the manufacturer positions it as an excellent device for cleaning hard-to-reach places. The review discusses the main technical characteristics and model functionality, how much the listed upgrades have affected the performance of the vacuum cleaner.

Specifications

Provides dry and wet cleaning.
Garbage collection in a 600 ml cyclone filter.
Wet cleaning in polisher mode.
Equipped with an electric brush.
Li-lon rechargeable battery with a capacity of 2200 mAh, battery life 120 min, charging lasts 110 minutes.
Noise is not higher than 55 dB.
20 sensors on the case.
Automatic installation on the dock.
It processes an area of up to 70 sq.m. per charge.
Management via touch buttons on the case, IR remote control.
Suction power 10 watts.

Average cost per model 20... On sale you can find models in yellow, pink and gray design.

Equipment

Dock station.
Remote control and batteries for it.
Power supply and recharging device.
User's manual.
Side brush.
Two replaceable filters.
Comb and brush for cleaning.
Microfiber cloths in the amount of two pieces.
Pallet.

Design

A compact round robot, available in vibrant colors - yellow, pink and modest gray. For easy passage of obstacles, the lower edges are beveled. The upper part of the case is covered with laminated plastic, there are touch control buttons and an infrared receiver from the remote control.

The side part and bottom are made of matte high-strength plastic. On the front of the robot there is a special protrusion, the highest part of the product, with its help the vacuum cleaner determines the height under which it can pass.

A dust collector is attached to the rear, a power connector and an on / off button to the right. At the bottom there is a side brush, two pads for contact with the docking station, driving wheels and a dust collector case.

The robot is equipped with sensors for viewing the room and ease of movement in it, the same sensors help to identify obstacles and possible obstacles. There is a sensor for determining the height, approaching an object identified as an obstacle, a base search sensor, all of them are located on the bumper.

Functional

The work is carried out in three modes:

Local - intensive cleaning of one specified area, in it the robot moves in a spiral.
Automatic - chaotic trajectory, time-limited mode.
Maximum - work goes on until the battery is completely discharged over the entire area of the room.

There is also a manual mode, it is activated from the remote control, it starts to work only after starting the robot in automatic mode. If you do not start auto mode, the robot will move, but will not start cleaning.

The garbage is removed by the front brush, picking it up to the center of the device, where the main brush and the rubber scraper are located. With all of these devices, garbage is collected and sent to a dust collector. Large and heavy parts of the garbage are sucked in by the dust collector on their own, the lungs fall into the tank with a two-layer filter, where they settle.

To ensure wet cleaning, a microfiber cloth is attached to a special bar behind the main brush. The napkin can be moistened. When installing the napkin, the Climb mode is turned off, since the nozzle can cling to small obstacles that the sensor detects.

The side brush of the model has been improved, it is covered not only with nap, but also with flexible wires. All parts of the brush are set on a rubber base, the villi come out of it at an angle, which makes their performance higher. The dust collector cover is located on top, making it easy to clean.