Modern washing machines of the famous Whirlpool brand are of high quality and durability. As practice shows, household appliances do not often break down, but there are still cases where replacement of parts or comprehensive maintenance is required. It is worth saying that repairing a washing machine is a very laborious and expensive process, so many people trust their appliance to an experienced master. In this article, we will tell you in detail how to properly repair Whirlpool washing machines!
Diagnostics and repair of malfunctions
The automatic washing machine has a rather complex design, and anything can fail at any time. As practice shows, repair of Virpul washing machines deserves special attention, and the main causes of failure can be:
After washing, water does not leave the machine
Surely, every owner faced this problem when he put on the wash, and after a while the machine froze, and the water does not leave the tank. What to do in such a situation and what are the reasons for this behavior of the technique?
- The drain electric pump has become unusable
- Clogged sewer pipe or drain hose
- Clogged drain filter or pipe
Before making repairs with your own hands, it is worth finding out what the problem is and what provokes this behavior of the device. In case of stagnant water, you should quickly get rid of the liquid through the emergency hose, which is located near the drain filter. Only after that, we proceed to troubleshoot, performing the following step by step:
- Unscrew the plug and get rid of the dirt on the filter
- Remove the drain hose and clean it from dirt.
- Check for blockage in the sewer pipe
Water does not heat up according to the set mode
In the event that your washing machine stops heating water to a certain temperature, you should pay attention to the heating element and the thermistor. Follow this way:
- Remove the back cover of the instrument and the bracket
- Disconnect wires from heat and thermistor
- Measure the resistance of the tena and thermistor contacts with a multimeter
- Having determined the malfunction of the heating element, it should be removed and replaced with a new one.
The task display is buggy and does not activate
After turning on the Virpul washing machine, did you start to notice a malfunction of the control panel? Stops working, and sometimes does not respond at all to touch? If you encounter such a problem, immediately unplug the device for a few minutes. If the problem persists after switching on, the contacts in the control board have departed.
Leakage of water from under the manhole cover
Quite often, during the washing process, water begins to flow from under the hatch. In this case, special attention should be paid to the rubber lining, which envelops the hole and allows the lid to fit snugly.To extend the life of the cuff, remove excess dirt and water that has accumulated at the bottom. Adhering to the rules of use, the material will not crack and will last as long as possible.
See also - How to extend the drain hose of a washing machine
Repair of the Virpul machine with vertical loading
Among the majority of boarding houses and small-sized rooms, washing machines Virpul automatic machine with vertical loading are in great demand. They are small and convenient to use. Also, the advantage is the ability to stop a given program and restart with new settings. But as they say, nothing lasts forever and the device may fail. In this case, just can not do without repairs and diagnostics. Please note that modern service centers have services that are not cheap, so we will step by step tell you how to disassemble a Virpul washing machine with a vertical load without spending a dime!
If you have a top-loading Virpul washing machine, do-it-yourself repairs should be done after a full inspection, following some simple tips:
- Release the side panel
- Lift up the display panel and pull it towards you.
- At a slight angle, disconnect the wires from the board and remove the panel
Self-repair of a Whirlpoo washing machine will save you money without leaving your home! Remember to minimize damage, adhere to safety rules and pay special attention to the timely maintenance and cleaning of appliances. We hope that now we will not have any questions, and our article will fully and fully open the topic: Repair of Whirlpool washing machines! Stop overpaying, now you are your own boss!
See also:
