home Installation / Configuration Built-in appliances How to install and connect an electric oven yourself

How to install and connect an electric oven yourself

Installation and connection of the ovenIn the kitchen, such a thing as the oven helps out the housewives when they want to cook something tasty. But any technique requires installation. But how to install the oven correctly yourself? To do this, you need to install it and connect it to gas or electricity.

 

 

Varieties of ovens

The so-called "ovens" come in two forms. The first of these is autonomous or independent ovens. Their functioning depends only on themselves and nothing else. The second option is not standalone. This type of oven is electrically connected to the main hob. In this case, the oven is located below, and the hob is located on top. Do-it-yourself installation of a built-in oven does not differ in anything from the installation of a conventional oven.

Varieties of ovens

Preparing to install and connect ovens

Do-it-yourself installation of the oven begins with the fact that the place where the oven will be located is freed and leveled.

It should also be noted that between oven and just anyone hob and the wall must have an air gap. It is no secret that in contact with high temperatures, the close location of the wall and furniture will not have any beneficial effect on your interior. On average, the thickness of the gap should be: from the back wall - 4 cm, from neighboring cabinets - 0.5 cm, from the floor - 8-9 cm.

Preparing to install and connect ovens

As you know, the oven can run on both gas and electricity. In the first case, it is necessary to provide a gas supply system and not violate its integrity. It is recommended to place the gas cabinet at a distance of 1.2 meters from the direct gas source.

The second option is an electric cabinet. In terms of self-installation, it is simpler, since it is easier to connect an electric oven to the mains. How to connect the oven to electricity? The outlet where the wires are connected is best placed at a distance not lower than 10 cm from the floor. The outlet must withstand a current of at least 40 amperes.

See also:

Gas oven installation diagram

Connect the oven with your own hands to the gas line using a flexible hose. A thorough sealing of the joints of the special crane and the outlet fitting is observed.It should be noted that such work is recommended for gas service employees. Moreover, without their personal intervention, it is not allowed to connect the oven to the gas main.

  • Install and secure the equipment. The connecting part of the pipeline is screwed into the gas supply line until it stops. This is done using a special gas wrench for working with pipes.
  • The expanding end of the pipe is tightened to the mounted pipe. The other end is connected to the exhaust valve located in the wall.
  • Using a wrench, each end of the pipe is twisted and tightened.

Gas oven installation diagram

Installing and connecting an electric oven

  1. The electrical current in the wiring is completely cut off.
  2. If the wires for connection to the network are not available, then it is purchased additionally. During the do-it-yourself installation process, it is attached to the corresponding terminals.
  3. From the distribution panel to the outlet where the cabinet will be connected, a 3-core copper wire is laid. If the cabinets consume power in the run-ups from 3 to 3.75 kV, then the required current strength in the power supply ranges from 16 A
  4. Examine the switchboard. Wiring must be provided. It may turn out to be both the VVG-3 * 2.5 wire and the VVG-3 * 4.0 wire.
  5. Connect to a power outlet. There are often 3 veins in the cable. Accordingly, a 3-pin socket is also selected for it.
  6. A test run of the oven is carried out and it is observed whether everything is done correctly. If so, then the work is complete.

How to check the oven operation correctly?

  • Turn on the cabinet after first reading the instructions provided by the manufacturer.
  • Check if the indicator lights are working.
  • All heating elements must be heated evenly. Your task is to track this process.
  • The heating mode is set at maximum power.
  • Preheat the oven to a temperature of +150 to +250 ° C. Leave the windows open or turn on the hood. This will completely eliminate the smell of factory grease and burning.

How to properly check the operation of the oven

See also - How to choose a tabletop electric oven for your home

Useful Tips

  • At the joints, soap the hoses that you used to connect the gas oven. Bubbles may appear on the hoses, this is a signal that the threads are not very tight in these places. It will be necessary to disassemble the problematic unit, and then re-install.
  • An electric oven, whether it is conventional or built-in, is highly energy efficient. As a result, it is necessary to lead an additional branch from the shield to it. A whole, intact wire with a cross section is used, the width of the current-carrying core of which is about 2.5 or 4 square meters. mm with an oven power higher than 3.5 kW.

See also:

11314 0

We advise you to read:

TOP 12 best washing machines up to customer reviews