Most standard refrigerator models have doors opening to the right. However, more recently, manufacturers have begun to make a universal version that allows the doors to be outweighed to the other side. This made it possible to improve the ergonomic and comfortable performance of refrigerators. In this article we will tell you how to outweigh the refrigerator door, it is possible to do such operations yourself at home with a minimum set of tools.
Reasons for performing this manipulation
There are all sorts of situations when it is necessary to outweigh the refrigerator door:
- the most significant reason for this is that you are left-handed and it is inconvenient for you to open the door on the right;
- the second reason is that when choosing dimensions and other factors, we simply forget about the fact that opening the door requires space, then the door itself goes beyond the boundaries of the refrigerator during opening. Therefore, it is sometimes necessary to simply outweigh it for convenience;
- the third reason, due to the fact that you have had a rearrangement in the kitchen, or you have made repairs, these factors can also affect the fact that you have to move the refrigerator door.
It is easier to rearrange the door on refrigerators that have two chambers. Since in single-chamber units it is necessary to manipulate the freezer door. There is an opinion that after the rearrangement the door closes more tightly, most likely this is due to problems with the seal (rubber gasket), it is better to replace it, this will save you from this problem. However, the reason may lie in deformation, or loose mountings, in which case outweighing can help.
See also:
- 7 best Bosch refrigerators according to customer reviews
- 8 Best Samsung Refrigerators According to Buyers
- 9 Best Inexpensive Refrigerators According to Buyers
- 10 best LG refrigerators according to customer reviews
How to properly outweigh the door
The process of hanging the door itself is not very complicated, in order to perform this operation you will need:
- flat screwdriver;
- wrench.
However, on refrigerators from different manufacturers, the fastening elements may differ, it also depends on the design of the unit itself, so the tools will need to be selected by size. Before starting the process, you need to make sure that there are plugs on the opposite side of the refrigerator and places for attaching the pivot hinges.
Now we will tell you how to outweigh the refrigerator door. First of all, de-energize your unit and remove all food and shelves.The refrigerator doors themselves are large and heavy, however, despite this they are quite fragile, any careless actions can damage them. All work must be carried out exclusively with protective gloves. Two-compartment refrigerators have three brackets: above, below and between the doors. So, it's time to describe the process itself:
- Using a flat screwdriver, carefully remove the plugs from the bolts, and unscrew them while holding the door so that it does not fall or bend the brackets.
- Remove the refrigerator door.
- Now you need to unscrew the pivoting hinges from the door itself, and install plugs in their place. Change the position of the loops to move them to the opposite side. Try not to touch the small parts of the pivoting hinges, otherwise this may adversely affect their performance.
- Then lift the door and start screwing everything. It is better to start at the top, this will reduce the likelihood of deformation of the loops. After doing the above operations, it is necessary to adjust the hinges so that the door closes tightly.
- The last thing to do is move the handle on the door.
See also - The refrigerator cracks or clicks during operation: what to do?
Conclusion
However, if an electronic display is provided in your refrigerator, the best solution would be to contact the master, since it is necessary to move the cable there. Try to install the door as best as possible, if you install it incorrectly, then it may no longer fit snugly, thereby the refrigerator compressor will start working more intensively in order to keep the cold in the chamber. However, because of this, it will quickly become unusable.
A little tip - when you rearrange the door, you need to tilt the refrigerator back a little. Thanks to this, the door itself will close to the end. You can do this by adjusting the special supports at the base of the refrigerator.
In modern models, refrigerators are supplied with instructions for rearranging the door, and some additional details. However, in some cases, it will be necessary to put a few extra objects for the door. It all depends on the manufacturer.
In this article we have tried, as informatively as possible, to answer your question, how to hang the refrigerator door to the other side with our own hands.
See also:
- 10 best Atlant refrigerators according to owner reviews
- 10 best refrigerators from according to buyers
- 11 best BEKO refrigerators according to customer opinion
- 15 best Liebherr refrigerators according to customer reviews