The ultra-thin model from the Korean brand differs from the competitors in its price category already at first glance, its body is non-standard for a square shape robot. This modification is considered optimal for cleaning corners and spaces along the walls. It features a model and a flat thin profile. How good the vacuum cleaner is at work and what advantages it has over analogues will be considered by this review.
Specifications
- Suitable for dry and wet cleaning.
- Collection of litter in a 0.4 liter cyclone filter.
- Li-lon battery with a capacity of 2200 mAh, enough for 120 minutes of operation, charging lasts 240 minutes.
- Installation on the station is automatic.
- Noise level no more than 60 dB.
- Side brushes.
- Soft bumper.
- Automatically connects to a charging station.
Average price tag .
Equipment
- Charging station.
- Network Connection Adapter.
- Infrared remote control and two batteries for it.
- Side brushes in reserve.
- Wipes for wet cleaning of the surface in the amount of two pieces and a nozzle for their installation.
- Brush for cleaning the housing and its components.
- Instruction
Design
A model with small dimensions and unusual design. Its low height is especially distinguished in comparison with competitors. The vacuum cleaner is made of high quality plastic, some elements of the body are painted red, but most of it is black. It is shaped like a square with rounded corners.
On the front panel there is a cover for removing the dust bag. Here is the button to start and stop the device. On the side are obstacle detection sensors, a shock absorber, collisions, air exhaust openings.
At the bottom of the robot there are two driving wheels and a front one for maneuvering. There are also two side brushes, a central module for suction, a battery compartment, height difference sensors that protect the robot from falling and turning over. A special nozzle is installed on the bottom for the robot to work as a floor polisher.
Functional
The vacuum cleaner operates in three main programs:
- Random cleaning - moving in a straight line to the nearest object or wall, after which the vacuum cleaner changes course, bypasses the object and again moves in one line. This cleaning continues until the battery is completely discharged.
- Work in a spiral - movement goes from the center to the edge along a spiral path with increasing diameter. Upon reaching the wall, the vacuum cleaner is sent back with a decrease in diameter. The cycles continue until the end of the charge in the battery.
- Working at an angle - the robot moves forward until it hits a corner, after which the movement continues along the corner until the next.
Traffic control can also be carried out manually using the remote control. A cleaning timer is available, the vacuum cleaner starts up at a certain time, but the timer is only available for 24 hours, programming for the whole week is not available. When the timer is set, the automatic cleaning mode is activated.
Cleaning is carried out by two side brushes, which lift all the debris from the floor and scoop it up to the suction inlet.The dust collector has two filters that trap all debris inside. The vacuum cleaner itself is small, which explains the modest volume of the dust collector. It is best to clean the waste collection container after each cleaning.
To carry out wet cleaning, a wet towel is attached to the bottom on a special nozzle equipped with Velcro.
Advantages and disadvantages
Based on customer reviews and expert opinion, we have highlighted a number of pros and cons.
Pros:
- Modern and stylish design.
- The case with a small thickness allows it to pass under the interior.
- Automatically installed on a charging station.
- Maneuverable, passes obstacles up to 15 mm.
- Function of work as a floor polisher.
- Remote control and manual control from it.
- Cleaning timer.
Minuses:
- No movement limiter included.
- Small amount of dust collector.
- Small wiping area on the floor.
See also: robotic vacuum cleaners before
