Top 12 best screw juicers according to customer reviews

Screw juicers are considered the most effective, they retain the maximum amount of nutrients in the raw material, squeezing the maximum amount of juice out of it. The shaft rotates at a low speed, due to which the juice does not heat up, unlike centrifugal models. The shelf life of such a drink is longer - during the spin cycle it does not come into contact with air and oxidizes less. Disassembling, assembling and washing the screw juicer is also easier. We have compiled TOP 11 of the best screw juicers of the year. When compiling the rating, we relied on technical specifications, functionality and customer reviews.

The principle of operation of the auger juicer

Screw juicers operate on the same principle as a meat grinder: the spiral axis rotates, promotes the product in the device, grinds it due to the pulp pushing behind. The crushed fruit passes through a fine grate, where the juice is separated from the cake. The efficiency of such a device is much higher than that of canonical models. In addition, this design can even handle herbs, seeds, soybeans and nuts.

See also - 8 best juicers before according to customer reviews

Varieties of screw juicers

Among all the models of screw juicers on the market, such types stand out.

Vertical

The screw and the entire driving mechanism are located vertically. The auger grabs and cuts the fruit, the pusher is practically not required during spinning. The width of such models is small, but they can reach a great height. They have the highest speed among other designs, comparable to the average performance of a centrifugal juicer.

Horizontal

The difference is in the location of the auger, as the name implies - here it is horizontal. The height of this design is less than the previous one. They are demanding for cutting raw materials before sending them into the neck, since its diameter is smaller than that of the vertical one. By analogy with a meat grinder, you often have to actively use the pusher. The work is slower.

Twin screw

The design uses two augers at once, which increases the amount of product processed at one time, even if it is hard or fibrous. This is a relatively young device that has become fashionable along with professional blenders in the wake of the fashion for healthy eating and eating raw fruits.

See also - Rating of the best juicers for home of the year

Pros and cons of screw juicers

Benefits:

• Very good result.The minimum extraction ratio is 75%, this figure is twice that of centrifugal designs. All escaping residues are almost dry.
• The resulting juice is homogeneous, not stratified.
• Consumes energy efficiently. For such a mechanism, you do not need to use powerful motors, since the auger rotates at a speed of only 40-80 rpm. A 200 W motor is sufficient, which consumes a small amount of electricity.
• Large selection of products used. The screw juicer is able to grind almost any product - soft, hard, fibrous or small. They can even squeeze out oil from the seeds.
• Silent work. A low speed of rotation of the screw does not create a lot of noise, on average this figure is about 50 dB, in models with high build quality and sound insulation, the noise is no more than 30 dB.
• Long shelf life of juice - there is no warm air during its production, which slows down the oxidation process. It can be stored for up to 48 hours.

disadvantages

• Food preparation. Design features require preparing fruits for squeezing juice, too large should be cut into several parts, which will go into a narrow neck.
• The duration of the process. Compared to the more complex structure of centrifugal models, augers are not able to quickly process large quantities of raw materials.
• Limited working time. After 30 minutes of intensive use, a blocking thermostat activates and shuts down the engine, protecting it from overheating.
• Higher cost in comparison with centrifugal.
• There may be some pulp in the finished juice.

See also - How to choose a blender for home in year

What to look for when choosing

1. Screw material. The most important part, more important than engine power. In budget models, screws are made of aluminum. It is better to choose juicers with steel or cast iron screws. High quality plastic works well, it is durable, does not distort the taste and quality of the juice.
2. Size and material of the mesh filter (membrane). Made of steel and plastic. Steel is used, which does not oxidize on contact with fruit juice, but if you plan to process a product of the same type, you can do with a plastic mesh. The size of the holes affects the texture of the juice and the amount of pulp in it.
3. Body material. Plastic or metal. The plastic used is safe, durable and easy to clean. But it is better not to choose white models, they quickly turn into the color of vegetables and fruits. Steel models have more weight, but are more durable in operation.
4. The number of screws. If you study user reviews, then one auger is enough for the production of juice from simple fruits and vegetables. But if you plan to make juice from greens, squeeze oil from nuts, seeds and cereals, then it is better to choose models with two screws.
5. The presence of reverse. Not present in every model, but very useful when you need to clean the auger. When you turn on the reverse, the auger begins to turn in the other direction, clearing itself of pieces of raw material stuck on it.
6. Number of speeds. Models with one speed are most popular, as a larger number of speeds adds to the cost. According to user reviews, the number of speeds has little effect on the work, so you should not overpay for it. But at the same time, according to professionals, the high speed copes better with hard fruits and does not allow the centrifuge to quickly clog. Also, the speed has an effect on the amount of pulp in the juice - the more revolutions during operation, the more pulp at the output.
7. Functional. Additional functions help you and optimize your work. Most of all, buyers appreciate the automatic ejection of the pulp, the direct supply of the finished drink, the anti-drip system. Experts also advise to pay attention to the presence of locks from accidental start-up, protection against overloads and overheating, etc. Additional functions include the availability of various nozzles, for example, for making pasta from frozen fruits, a nozzle for chopping or slicing, and cooking noodles.
8. Noise level during operation. On average, the indicator for inexpensive models is 50 dB, but if there is a need for quiet operation, it is better to overpay a little and get the figure half as much.
9. Manufacturer. Choose proven brands or low-cost brands that have not been tried by other users - in more detail, the most popular brands will be considered in the TOP juicers below this year.
10. Power. The speed of preparation of the product depends on it. On average, this figure is 200 W - it gives a glass of juice in about 2 minutes. Enough for home use.
11. Time of continuous work. Many models have a specified maximum duration of use, after which the juicer shuts off to lower the motor temperature.
12. Size and weight. It is selected based on the size of the kitchen and the intended storage space.

5 best vertical screw juicers

Mirandi J-100

average cost . One auger. Power 200 watts. The collection of fluid in a glass of 1000 ml is supplied directly. Anti-drop system. Automatic discharge of oilcake into a 1 liter tank. Plastic body, stainless steel centrifuge mesh. The set has a cleaning brush. Legs with rubber base. It develops up to 55 rpm. Reverse system. Weighs 3 kg. Read more in the review Mirandi J-100.

Benefits:

• Powerful.
• Rich set of functions and modes.
• High speed of juice production.
• Quick cleaning mode with water.
• Beautiful design.
• Touch control panel.
• Works for a long time without stopping.
• Low noise level.
• Large mouth of the receiver.

Disadvantages:

• High price.
• Minor design flaws.

Mirandi also has another decent Mirandi J-60 screw juicer. Its good shape allows you to conveniently place a juicer even in a small kitchen. One of the main structural elements is the specially shaped auger, thanks to which Mirandi squeezes out the maximum amount of juice. Read more in the review Mirandi J-60.

Oberhof DRUCKEN Q-12

Juicer Oberhof DRUCKEN Q-12 is made by a European brand of German origin. The assembly was carried out using innovative technologies. A two-turn screw of a special shape is installed inside the device, due to which maximum spin is achieved. Therefore, at the outlet of the fruit, 35% more juice is obtained than when using similar devices. The device works almost silently, despite the high power of 400 W. The average market price is .

Benefits:

• High build quality.
• Easy-care and durable plastic and stainless steel housing.
• Turns on with one click.
• The pulp is ejected automatically.
• When overheating, auto-stop is activated.
• If the parts of the juicer are not properly fixed, it will not start.

Disadvantages:

• Heavy enough - weight 8.35 kg.

Oberhof DRUCKEN Q-12 is suitable for everyday use. The device economically consumes electricity, allows you to squeeze the juice quickly and efficiently, spending a minimum of time and effort. Read more in the review Oberhof DRUCKEN Q-12.

ENDEVER Sigma-95

average cost . Equipped with one auger. Power 350 watts. The container for collecting the drink, 1000 ml, flows into it automatically. Anti-drip system. Automatic ejection of pulp into a 800 ml container. Protective mechanisms against accidental starting and overheating of the motor. The casing and centrifuge are made of stainless steel. Includes loading tray and cleaning brush. Power wire 110 cm. Work at 1 speed. Reverse system.

Benefits:

• Good quality for a small price.
• Powerful.
• Metal mesh.
• High efficiency.
• Cleaning brush.
• Reverse system.
• Protective systems.

Disadvantages:

• The screw is covered with plastic, which may affect the duration of its use.
• Often clogged with fibrous products.
• Plastic juice glass.

See also - 9 best citrus juicers according to customer reviews

Kitfort KT-1101

average price . One auger. Power below - 150 watts. The finished raw material is collected in a container by a direct output system, anti-drip mechanism. The cake comes out automatically, a protective mechanism against accidental start-up. Plastic case.The set includes a tray for loading raw materials, a cleaning brush. Level indicator of the received drink, feet with rubber base. 120 cm power cable. In additional functions, automatic filter cleaning system. One speed. Reversible movement. Height 14 cm. Weight 4.2 kg.

Benefits:

• Good assembly, durable auger and plastic.
• Low noise level during operation.
• High quality spin.
• Reversible movement.

Disadvantages:

• Minor design flaws.

Panasonic MJ-L500

average cost . One auger. Power is 150 watts. The liquid is collected in a 400 ml container, fed directly there. Anti-drip system. Automatic ejection of cake into a 1200 ml tank. Soft start and overheating protection system.

Stainless steel case and centrifuge. The set includes a tray for loading raw materials. Rubber base not feet. Additional functions include a self-cleaning system, processing of hard, soft and frozen foods. 2 high-speed operating modes. It speeds up to 45 rpm. Height 17.6 cm, weight 4 kg.

Benefits:

• Small size.
• Sorbent nozzle.
• Good spin quality.
• Simple assembly.
• The strength of the connection and all details.
• Quiet work.

Disadvantages:

• Small loading hole.
• Relatively low power.

See also - 10 best juicers to according to customer reviews

4 best horizontal single screw juicers

Kitfort KT-1110

average cost . Power is 150 watts. The finished drink is collected in a glass, there is no direct feed system. There is a system for automatic ejection of oilcake. Separator to reduce foam. The motor starts smoothly. Plastic housing, stainless steel mesh. Round neck. The set includes a tray for loaded products and a cleaning brush. Legs with rubber base. Wire 119 cm. Develops up to 100 rpm. Reverse. Dimensions (W) 18, (H) 32, (D) 33.5 cm, weight 3.7 kg.

Benefits:

• Quiet work.
• Squeezes out even solid foods.
• The cake comes out almost dry.
• Nice design - white and orange body.
• Separator for foam.
• Reverse.
• Price.
• High speed of work.

Disadvantages:

• Continuous work only 15 minutes.

Hurom GI Series GI-SBE08 / BBE08 / LBE08

average cost . Power is 150 watts. The liquid flows into the glass using a direct supply system. Automatic ejection of cake. Overload protection. Case material - plastic. Round shaped feed mouth. The set includes a tray and 4 attachments. Wire 140 cm. Develops up to 64 rpm. Dimensions (W) 31.9, (H) 16.1, (D) 36.7 cm Weight 4.7 kg.

Benefits:

• Wide functionality.
• Simple system of use and cleaning.
• Handles any type of raw material.
• High speed.
• Overload protection.
• Quiet work.

Disadvantages:

• Small loading hole.

Tribest Solostar 3

average cost . Power 180 W. The drink is collected in a glass of 1 liter by an automatic system. Automatic ejection of cake into a 1 m tank. Separator for separating foam. The motor starts smoothly, protective systems against its accidental start. Case material - plastic.

The set includes a tray, a cleaning brush, a nozzle for mixing, for spaghetti and fettuccine. Indication of juice level. Legs with rubber pads. Wire 140 cm. Develops up to 80 rpm. The volume of pulp can be adjusted. Reverse. Dimensions (W) 47.5, (H) 24, (D) 33 cm. Weight 7 kg.

Benefits:

• High efficiency.
• Simple assembly.
• The cake at the outlet is practically dry.
• Low noise level.
• Manual drive to complement the mechanical.
• Beverage Level Indicator.
• Reverse.

Disadvantages:

• Flimsy containers for juice and waste.

Sana EUJ-707

average cost . Power is 150 watts. The drink is collected in a glass by the direct dispensing system. The cake is thrown out automatically. The set includes a tray, a cleaning brush, a sieve for a homogenizer, a nozzle for pasta and spaghetti. Rubber pads on the legs. Develops up to 70 rpm. The percentage of pulp is adjustable. Dimensions (W) 42, (H) 18.7, (D) 32 cm.Weight 5.7 kg.

Benefits:

• Powerful.
• Quietly working.
• It is just assembled and disassembled.
• High quality of the finished juice.
• Rich equipment.
• Nice design.
• Multifunctionality.

Disadvantages:

• Marked chrome-plated surface.

TOP 3 horizontal twin-screw juicers

Wellra TGJ 50S

average cost . Power 150 watts. The drink is served directly by the automatic system. The cake is ejected automatically. Motor overheating protection. Case material plastic. Neck for bookmark 36 mm. In a set a tray, a grid for drinks with pulp, without it, a grinding nozzle. Legs with rubber pads. Wire 140 cm. Work at 1 speed. Speed ​​120 rpm. Reverse. Weight is 6 kg.

Benefits:

• Copes with any food, including herbs.
• Good equipment.
• Possibility to make a drink with or without pulp.
• Does not hum or vibrate.

Disadvantages:

• Two augers give a lot of foam when processing fruits.

Tribest Green Star Elite GSE-5300

Cost . Power 200 W. Juice is served directly in a 900 ml capacity. Automatic waste disposal. Smooth motor start and protection against accidental start. Case material - plastic. In the set:

• tray for downloadable products;
• cleaning brush;
• spout for making bread sticks;
• stirring nozzle;
• smoothies;
• for chopping meat products;
• cutting dry raw materials;
• making spices;
• ice cream and fruit sorbet;
• pastes;
• nut and milk pastes;
• live cereals;
• dishes for children;
• noodles.

Finished product level indicator. Rubber caps on the base. Wire 140 cm. Develops up to 110 rpm. The percentage of pulp is adjustable. Reverse system. Dimensions (W) 46.4, (H) 17.5, (D) 31.8 cm.Weight 8 kg.

Benefits:

• Very rich scope of delivery.
• Drink level indicator.
• High power and speed of work.
• Quietly working.
• Protective mechanisms.

Disadvantages:

• Turns soft fruits into puree, works best with hard and greens.

Omega TWN32

average price . Power is 150 watts. The juice is fed into the container directly by the automatic feeding system. Waste is thrown away automatically. In protective functions - shutdown in case of overheating and protection against accidental start. Case material - plastic. Stainless steel centrifuge mesh. The set includes a tray for loading and a net for drinks with pulp. Legs with rubber pads. Wire 140 cm. 1 high-speed mode. Reverse system. Dimensions (W) 43.4, (H) 16.5, (D) 30.5 cm. Weight 6 kg.

Benefits:

• Graceful appearance.
• Simply disassembled and cleaned.
• Silent work.
• Delicious drinks from any fruit.
• Almost dry waste output.
• Compact size.
• Reverse.
• Protective mechanisms.

Disadvantages:

• According to reviews, the mesh is fragile, the plastic on it cracks and requires replacement of the element.