When choosing a heater for an apartment or a house, we are mainly guided by the power criterion, and hence the ability to heat a particular area. But, one should not lose sight of the fact that different heaters affect the atmosphere of the air in different ways. Many of them dry the air. Therefore, it is very important to make a choice in favor of a device that not only generates heat, but also supports a healthy microclimate. After all, this directly affects the state of general well-being and human health. Now let's take a closer look at which heater does not burn oxygen.
Which ones burn oxygen and which not?
What is the essence of the problem? A certain category of heaters very dry the air, that is, they greatly reduce the level of moisture. Mostly oxygen heaters of the old generation:
- those that have open shadows (spirals),
- fan heaters
- fireplaces;
- Home-made heating devices.
The optimal indicator for a person, the humidity level is 60%. With strong heating, this balance is violated, and there is a constant desire to ventilate the house. Such manipulations in the cold season are not very convenient, because this can lead to drafts. And it’s illogical to heat and release heat.
Another disadvantage of such heaters is that the dust falling on the heating object attracts its combustion, and therefore the exhaust of toxic substances enters the air.
There are many disadvantages. To make the right choice in favor of a heater for the home, you should find out which of them do not dry the air.
Modern heaters are designed in such a way that the level of oxygen combustion is quite low, and some models do not burn it at all. Fortunately, currently there is a choice of such heaters. All of them differ not only in the brand and manufacturer, but also there are different types and principles of work.
See also - How to choose a quartz infrared heater
Types of heaters that do not burn oxygen
If you are faced with the question of choosing a safe and effective heater for housing or other premises, then the following options are offered to your attention:
- Infrared heaters.
- Oil batteries.
- Ceramic panels.
- Steam drip heaters.
- Quartz heaters.
- Convectors.
- Mycothermal heaters.
In practice, these devices are widely used for heating homes, offices or cottages. We consider in detail each of the species.
See also - Choosing a good gas heater for the home
Infrared heaters
Heaters of this type have proven themselves well. Their direct action is aimed at heating objects, and then heating the room as a whole. Thus, even when it is turned off, the room is kept warm for some time.
- It has no effect on the air. That is, they do not overheat it, thereby not burning oxygen.
- Safe enough, since infrared rays will never burn a person.
- The advantage is its versatility. Such a heater can be used not only indoors, but also outdoors.
- Another advantage is the low power consumption and the relatively low cost of this device.
An infrared heater is somewhat similar to a convector heater, but differs in the principle of operation. Therefore, when choosing, consumers often hesitate between two options.
TOP-3 infrared heaters Ballu
- Ballu BHH / M-09
- Ballu BIH-LW-1.5
- Ballu BIH-APL-0.8
See also - How to choose an inverter heater for home and outdoor
Ceramic panels
This type of heater is characterized by a hidden heating device. Designed in such a way that the heating element is in a ceramic sheath. That is, the heat does not come directly from it, but from a heated ceramic surface. It can be emphasized that such a heater dries the air less at times than the one that emits heat from the heated metal surface. Since the latter is more capable of oxidizing air by burning it.
This model is characterized by a relief coating, due to which the surface of the heater heats up less, and therefore will dry the air less.
See also - 20 best Ballu heaters year according to buyers
Steam drip heaters
This radiator has a special scheme of work. It contains a heating element and water as an auxiliary. That is, the water heats up, which results in the release of warm steam, which heats the room. Condensation is collected in the radiator and a circulation process takes place.
According to the characteristic, it is not difficult to understand that such a device does not dry the air at all, but on the contrary, contributes to a favorable and necessary level of moisture in the room.
At the same time, a vapor-spray heating device is quite economical, since it consumes little electricity. And when it is turned off, the heat is retained for a long time.
See also - 18 best Timberk heaters of the year
Oil heaters
This type of radiator generates heat by heating the oil inside it. Thus, heat is radiated at a given temperature (depending on the mode).
Oil, like the previous ones, does not burn oxygen, therefore it is optimal for the correct balance of heat and moisture. The advantage of this type of heater is that the apartment heats up quickly. However, among others, it has fewer advantages due to the fact that:
- It consumes a lot of electricity.
- The surface of the radiator becomes hot. This is the risk of getting burned.
- Such a heater must not be left switched on when leaving the premises.
TOP-3 Timberk oil heaters
- Timberk TOR 21.1507 BC / BCL
- Timberk TOR 21.1005 SLX
- Timberk TOR 51.2009 BTM
Quartz heater
A type of infrared type heaters, as well as those that do not reduce the level of moisture in the room. This is because quartz is a highly resistant type of material. It does not heat up to very high temperatures and, as a result, does not burn oxygen. However, it heats objects and people effectively. It gives off pleasant, natural-like warmth.
See also - Choosing a good heater for the country
Convector heaters
A very popular type of heaters for any room. The device has a pretty natural way of working. From below, through the grill, cold air enters the radiator, heats up to the desired temperature and goes outside. Over time, the air cools down and the procedure is repeated. Using the sensor, you can set the degree of heat.
The convector works in such a way that heated air comes out, but without loss of moisture. This type of heater does not contain a fan, only heats the air, and the body itself does not heat up, which makes it safe. That is, this is the best way to maintain the set temperature in the room, while not disturbing the humidity level. There are three types of convector heaters - wall-mounted, floor-standing and recessed.
TOP-3 convector heaters Electrolux
- Electrolux ECH / AS-1000 MR
- Electrolux ECH / R-1500 T
- Electrolux ECH / AG2-2500 T
Micathermic heaters
This modern type of heater is a fairly new technology. It belongs to infrared type and is characterized as an economical heating option. Unlike heating devices similar to it, it emits long infrared waves.
Such a device can be used as a floor-standing radiator or mounted on a wall. The heating element of this device is a metal plate with a transparent laminated mineral coating.
Such a heater is considered a know-how among climatic technology, therefore, its cost is higher than others. If you decide to purchase this particular type of heater, then given its novelty and high price, it is recommended:
- Follow the instructions for use;
- Buy such equipment only in specialized stores, with the possibility of exchange or return if necessary;
- Find out about the availability of warranty service.
The good news is that there are plenty of options for heating the room in the cold season. And I am even more pleased that there is an opportunity to choose one that will not only warm, but also will not harm health.
It can be safely noted that all the options considered deserve attention. You should choose a specific one based on personal preferences, as well as the dimensions and interior of the room.
See also:
- 20 best Ballu heaters year according to buyers
- 5 best heaters Stiebel Eltron of the year
- 5 best digital weather stations for home of the year
- 5 best electric fireplaces and hearths according to customer reviews
- 9 best electric fireplaces and hearths Electrolux according to customer reviews
